Do you know you a wifi extender like Altice wifi extender setup can boost the average range of wifi signal to long distance? Well as we know the typical WiFi range that a router provides within a home is 150 feet, or 46 metres. Even while this is a positive thing, it is not sufficient to ensure that your electronic devices will receive a complete WiFi signal even when they are inside that radius.
This is because the wireless connectivity will become less reliable as you go further away from the router. Installing the Altice WiFi extender is therefore the most effective method for extending the range of the WiFi connection and it really works, even in the crowded areas!
However, in order to successfully complete the installation of the Altice WiFi extender, you will need to set up the device. Therefore, in this below given guide of Altice WiFi extender setup, you will acquire knowledge regarding the operation of this range extender as well as the configuration of the Wi-Fi extender.
Altice Wi-Fi Range Extender
Adding the Altice Wi-Fi extender to your primary router will cause an increase in the amount of space that is covered by your home’s WiFi signal. In addition, the Wi-Fi symbol displays a number of full bars, each of which represents the strength of the WiFi connection with a particular device.
However, it is important to keep in mind that the Wi-Fi indicator bars do not represent the quality of the internet connection. These bars, on the other hand, indicate the strength of the network in your device, exactly as they do in cellular networks.
If you want to play online games or stream high-definition videos, you don’t have to confine yourself to the room in which your WiFi network is located merely to improve the quality of the signal. With the help of the Altice WiFi extender, the WiFi signal will go further, and you won’t have to be concerned about experiencing high ping or frequent disconnection.
How does Altice wifi extender setup works?
Consider the Wi-Fi extender offered by Altice USA to be similar to an amplifier. The signal coming from your primary router is picked up by this device, and it then amplifies it, resulting in an increase in the overall range of your WiFi network.
On the other hand, if the internet connection that the router receives from your internet service provider (ISP) is slow, the speed that you receive through the Wi-Fi extenders will be the same. This is due to the fact that an internet service cannot be affected by the use of a range extender. It only extends the range over which wireless connections can be made.
Therefore, if you connect a Wi-Fi range extender to your network, you will be able to access the internet in areas that once lacked any form of wireless service.
How can I connect my WiFi Extender to the WiFi I already have in my home?
Following the installation of the Altice Wi-Fi extender, you will need to connect to the previously established Wi-Fi network.
Therefore, in order to set up your Altice Wi-Fi extender on your own computer or laptop, follow these instructions.
SSID and Password of the Currently Utilized Router
Make sure you have the SSID (also known as the Network Name) and password for your router’s Wi-Fi network written down before attempting to set up any wired or wireless connection. Examine the face of the router, as well as the rear of it. You will discover a sticker that has the following credentials printed on it:
- SSID (Network Name)
- Password
- Default Gateway
- Model Number
The preceding list of credentials could be different for each model; however, you are required to take notice of the first three items on the list.
What should you do if you can’t locate the network name and password for your router?
Get in touch with the customer care staff at Altice One. First, they will ask you for specifics such as the model and serial number, and after that, they will provide you the necessary information.
After that, you will need an Ethernet port on your personal computer or laptop, as well as an Ethernet cable.
- Join Your Device to the Wi-Fi Extender Provided by Altice.
- Connect the power extender to the available outlet.
- Connect the extender with one end of the Ethernet cable, and then connect the other end to the computer.
- You can switch to a wireless connection in the event that you are unable to set up a wired one. However, in order to do that, you will first need to detach yourself from the Wi-Fi network in your home.
- Allow your device to search for “Altice Extender” or another term that is comparable in expressing the Altice extended Wi-Fi network.
- Join that network by connecting. Aside from that, you need to keep in mind that if you connect to the Altice Wi-Fi extender in any way, whether it be cable or wirelessly, you will no longer have access to the internet.
- In addition, if the WiFi range enhancer device has a switch on the side, you should switch it to the “Extender” mode from the “AP” (Access Point) mode if it was previously set to that mode. The direct connection to the router is established when using the AP mode. Because of this, the AP mode is helpful when you only have a modem and not a router at your disposal.
Altice Wi-Fi Extender Web Interface
In order to configure the Altice Wi-Fi extender, you will need to navigate to its associated online interface.
- Open a web browser on your desktop computer or portable device.
- In the address bar, type 192.168.0.1 or 192.168.1.1, and then press the enter button. If it doesn’t work, don’t worry.
- Find the default gateway by looking through the user manual for the device. In addition to that, you may look it up on Google as well. Enter the model number of your extension as the last step, and you will immediately be presented with the desired IP address.
- At this point, you are going to need to enter the administrator credentials. In the field for the username, type “admin,” and in the field for the password, type “password.” If these credentials do not work, the manufacturers of your router should be contacted. In addition, you can alter these credentials at a later time by going into the settings of the router.
- If you are unable to access the web interface of the extender, you should attempt to reset the device.
Reset Extender
- You’ll find the button to reset the extension on the reverse side of the device.
- Keep pressing and holding the button for anything between 5 and 10 seconds. It’s possible that you’ll need to use something skinny, like a paperclip.
- After that, the extender will revert to the settings that it had when it was first manufactured.
- Now, please provide your best effort when entering the default login and password.
Set Up Altice Extender
- After you have successfully logged in, on-screen prompts will walk you through the process of setting up your account.
- On the other hand, if you purchased a used WiFi extender, it’s possible that some of the settings will need to be adjusted.
- First, update the network name or SSID by going into the Wi-Fi settings on your device. It is highly advised that you set that to be the name of your router.
- Repeat steps 1 and 2 with the password for the extension as well.
- Afterwards, you can log out of the web interface of the Altice Wi-Fi extender and save the changes you’ve made.
What ends up happening is that the router you already have recognises the range extender as a Wi-Fi-enabled device, in the same way that it recognises laptops, cellphones, and other devices. Therefore, when you wish to connect to the expanded WiFi, you won’t need to input a different password because there isn’t going to be one.
Before you can have an internet connection, it is possible that you will first need to pair the router with the extender.
Pair Router with Wi-Fi Range Extender
Before you even begin to set up the range enhancer, you can probably already associate the router with it. Whether you pair the extender before or after the initial setup has no bearing on the settings of the extender.
Now, follow these steps to pair your router with the extender that you just purchased:
- To begin, could you please turn it on and pay attention to when the red light blinks?
- At this point, you need to activate the WPS feature by pressing the button located on both the router and the extender. The WPS function makes it possible for Wi-Fi-enabled devices to establish a connection with the router.
- When the lights on both devices change to a consistent white colour, this indicates that the devices have successfully linked.
- You are now able to detach and power down the extender, after which you can position it at a distance that is appropriate between the dead zone and the router.
How Should I Position My Altice WiFi Extender?
Now that the configuration has been finished, and the device has been linked, it is time to select a location for the extender to be placed. The main router should not be too far away from the optimal location in your home, which should be somewhere close to the dead zones.
If you install the extender in close proximity to the router, the range of the wireless network will not be affected in any way. On the other side, if you set it in a location that is an absolute dead zone and is too far away from the router, it will not pick up the WiFi signal.
Because of this, you should position it somewhere in the middle so that it can receive the signal rapidly and then rebroadcast it to the devices you have.
In addition, it is critical to make sure that the antennas on your router are pointed in the most effective direction. When it comes to getting the most out of your network, some specialists recommend buying the antennas separately. You can also purchase antennas to use with your router and your extender.
Nevertheless, check to see that the antennas are not working in any other frequency bands outside the WiFi 2.4 GHz and 5.0 GHz bands.
FAQs
Is the Altice One Compatible with WiFi Extenders?
Yes. The most recent update to the functionality of the Altice One routers makes it possible to connect external devices, such as WiFi extenders.
Is an Extender Built Into the Altice One Mini?
No. It should be noted that the Altice One Mini is not a WiFi extender. In its place, it is a comprehensive bundle that includes internet, television, audio, and landline services. You may also view your favourite television shows by downloading and installing the Optimum app on your device.
Conclusion
You won’t need any assistance from anyone else to get your Altice WiFi extender setup and running. Before you join your other electronic devices to the expanded WiFi network, you are need to first link the device in question with your existing router.
After that, you will be able to have a stable WiFi connection at vast ranges with the Altice WiFi range extender.
I hope this Altice wifi extender setup boost the average range of wi-fi signal for you. It worked for others so I hope it will work for you too. If you would like to know any thing else the comment below and don’t forget to share it!
